[. . . ] Start Here Easy Setup Instructions 1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink Tanks 1 Carefully remove all items from the box. 1 Remove the shipping materials from the printer. 1 Remove the Print Head from its package. 1 Remove the Black Ink Tank(BCI-15 Black) from its package, and pull off the Protective Cap. NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the Protective Cap. PIXMA iP90 Photo Printer 2 Remove the Protective Cap from the Print Head. [. . . ] ·Close any open software applications including anti-virus, computer security and other software. IMPORTANT: If you see the Found New Hardware Wizard, click Cancel. the printer. NOTE: When performing infrared communication, make the IrDA port of each other's device stand opposite to each other. Distance between the IrDA ports should be 31. 5 inch (80 cm) or less. 8 TURN THE PRINTER ON. 8 Read the License Agreement, then click Yes to continue. Installation of the printer driver and on-screen manuals will begin. 9 Follow the on-screen instructions to install the remaining software. 10 Follow the on-screen instructions to register your product. 3 Insert the "Setup Software & User's Guide" CD-ROM. IMPORTANT: If your computer cannot detect a computer port, refer to "Troubleshooting" instructions in the Quick Start Guide. 9 Follow the on-screen instructions to install the remaining soft2 Turn on your Mac. 3 Insert the "Setup Software & User's Guide" CD-ROM. 11 When the "Installation completed successfully" screen appears, click Restart. The setup program should run automatically. NOTE: If the setup program does not run automatically, Click Start, then Run, then type D:/Msetup4. exe, where D is your CD-ROM drive. 4 When the main menu appears, click Easy Install and follow ware. When the "Installation Results" window appears, click OK. NOTE: If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. 4 Double-click the Setup icon. the on-screen instructions. 12 After restarting the computer, start Printer Setup Utility 10 Follow the on-screen instructions to register your product. 5 When the "Authenticate" screen appears, enter your adminis11 When the "Installation completed successfully" window (start "Print Center" when you use Mac OS X V10. 2. x) and then check that the name of the printer you want to use is shown in "Printer List". If the printer name is not displayed, press the Add button to add the printer. For more detailed instructions, refer to the Mac on-line Help. NOTE: If print quality is not satisfactory after installing the printer, you may need to align the Print Head. [. . . ] All other products and brand names are registered trademarks or trademarks of their respective owners. [. . . ]